Vulkem 350NF 950NF 950NF indoor Vehicular System

The purpose of this document is to establish uniform procedures for applying the Vulkem® 350NF/950NF/950NF Traffic Deck Coating System. This document describes application procedures for medium and heavy duty requirements.

The techniques involved may require modifications to adjust to jobsite conditions. If you have any questions at all about your application, contact your local Tremco Field Sales Representative for specific design requirements.

This document will provide the necessary instructions and troubleshooting for the application of the Vulkem Traffic Deck Coating System to qualify for the manufacturer’s warranty.

Substrate Preparation

Investigation of the substrate should be performed to determine the type of surface preparation that will need to take place to achieve the appropriate surface profile required for the coating application. Depending on the condition of the concrete, one or more types of surface preparations may be required.

Refer to ICRI’s Technical Guideline No. 03732- Selecting and Specifying Concrete Surface Preparation for Sealers, Coatings and Polymer Overlays for best practices on selecting the appropriate method of concrete preparation. Thin film and high-build coating applications will require the surface profile, CSP 2-4.